bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Starcraft Launch Travel Trailer


  • Will Dexter E-Z Flex Suspension Kit Raise or Lower Ride Height
  • The Dexter E-Z Flex Suspension Kit part # K71-652-00 won't change the height of the trailer even if the height of the equalizers are not the same. The system will even out so you will to retain the same ride height as before regardless of the equalizer height to an extent.
    view full answer...

  • Possible Replacement Trailer Taillight for 2018 Starcraft Launch 239 BT
  • I wasn't able to pull up a decent picture of the rear of your Starcraft 2018 Launch 239 BT but if the light assembly looks like the part # RVSTB60 then this would be the correct replacement light. Otherwise email me back with a picture of the lights you have and I'll be able to tell what you'd need. The great thing about trailer taillights on campers is the companies all basically make the same designs and they are really easy to identify and are also interchangeable. I linked all the ones...
    view full answer...

  • Recommended Replcement RV Stereo
  • We have a few stereo options that will work great for you but it will depend on whether you have a single DIN or double DIN stereo currently. If you have a single DIN, I recommend using # DV3300SBL or # 324-000032. Both of these are great options. The main difference is the Furrion is designed to play music and listen to the radio more so than watching DVDs. The Drive RV DVD player might be better if you are primarily using it to play DVDs. If you currently have a double DIN stereo,...
    view full answer...

  • Will Tongue Weight Change if Using Timbren Silent Ride
  • The axle spacing of the Timbren Silent Ride part # TSR7000T04 is the standard 33 inch spacing so the tongue weight would not change at all assuming you installed in exact same location as axles it was replacing.
    view full answer...

  • Recommended Weight Distribution System for 5000 lb Starcraft Launch Travel Trailer
  • When the weight of the trailer gets to the point where it is greater than 50% of the weight of the vehicle towing it, we recommend using a weight distribution system. Since you have a camper which has tall sides on it that can act like a sail when buffeted by crosswinds or turbulence from passing traffic, you really should choose a system with an integrated sway control component. From the information you supplied (thanks for that, by the way), you're dealing with a maximum tongue weight...
    view full answer...

  • PSI Rating for Lionshead Steel Modular Trailer Wheel # LHHA315
  • The PSI rating for the valve stem that comes with the Lionshead Steel Modular Trailer Wheel # LHHA315 is 80 PSI.
    view full answer...

  • How to Correctly Measure a Cam Lock Cylinder for Replacement
  • The correct way to measure a lock cylinder for length is by the threads. The correct way to measure for width is by the two flat spots. Therefore, based on the photo you attached, you will need a 7/8" long lock cylinder like the Camco Cam Lock part # CAM44323 if your two flat spots measure to be 5/8". If the two flat spots measure 3/4" then you will want to use the Replacement Cam Lock Cylinder for RVs part # 295-000003 which also has the option to be keyed alike.
    view full answer...